Standard Smart Device Automotive Design
- Open/Short/Current/Temp. Protection
- SPI Diagnostics/Configuration
Standard Low-Side Driver
Low-Side Driver with Current Feedback
- Programmable Turn-On Current
Standard High-Side Driver
- 5-44A Output, up to 100KHz
High-Side Driver with Current Feedback
- 5-44A Output , up to100KHz
Smart/Programmable IGBT/Bipolar Driver
- Current Feedback/Control/Diagnostics
- +/-100mA Output (Programmable)
- Pre-Driver for Smart Ignition Coils
Smart/Programmable H-Bridge Driver
- SPI Programmable Wave Shaping
Smart/Programmable Peak-And-Hold Driver
- 1.2A to 3.6A Peak Current
- 0.7A to 2.0A Hold Current
- Complete SPI Control/Diagnostics
DAC Analog Output Driver
- SPI Configurable/ Tristate-able
Single-Ended Analog Input
- Programmable Pull-Up/Downs (software)
- Configurable Low-Pass-Filter (hardware)
- Fully Protected +/-250V, Diagnostics
|
Differential Analog Input
- Programmable Pull-Up/Downs (software)
- Configurable Low-Pass-Filter (hardware)
- Fully Protected +/-250V, Diagnostics
Differential Current Sense Analog
- Configurable Gain/Bias (hardware)
- Fully Protected +/-250V, Diagnostics
Single-Ended VRS (Schmidt Trigger)
- Programmable Pull-Up/Downs (software)
- Configurable Low-Pass-Filter (hardware)
- Programmable Hysteresis (software)
- Open/Short Protection and Diagnostics
Differential VRS (Schmidt Trigger)
- Configurable Low-Pass-Filter (hardware)
- Programmable Hysteresis (software)
- Open/Short Protection and Diagnostics
- Programmable Knock Sensor DSP or RISC
Programmable Lambda Sensor Interface
- 6-wire, Dual-Pumping Cell
- SPI Diagnostics/Configuration
LVDT Sensor Interface (Ratiometric)
- Open/Short Circuit Diagnostics/Protection
Load Cell/ Strain Gauge Interface
- Full Bridge, Differential Amplifier
- Programmable Gain (software)
Charge Amplifier Interface
3-Axis Accelerometer/Inclination Sensor
IEEE 802.15.4 ZigBee Transceiver
- 2.4GHz, 16 Channels, 250 KBits/s
|